BMW S322A — Comfort Access (keyless entry)
Keyless entry and start: the doors unlock from the handle without touching the fob.
Quick answer
S322A is BMW's factory option code for comfort access (keyless entry). Keyless entry and start: the doors unlock from the handle without touching the fob.
Should you care about Comfort Access (keyless entry)?
A desirable convenience feature. Be aware keyless cars are a relay-theft target, so budget for a Faraday pouch and check the handle sensors all respond.
How to tell if a BMW has S322A
- Look for
S322Aor just322on the original build sheet or window sticker. - Check the options list in the AutoTrader, eBay or dealer listing.
- Decode it from the VIN with our free BMW VIN decoder, then confirm the fitted codes in a full report.
- Where relevant, verify it physically on the car during the viewing, as described above.
Bimmer.AI is designed to help you identify BMW-specific buyer risks before you travel, negotiate, or pay for an inspection. It does not replace a physical inspection by a qualified mechanic, a legal vehicle-history check (e.g. HPI Check), or independent verification of finance, stolen, or write-off status. Repair-cost ranges are indicative UK figures that vary by region, specialist, parts supply, and labour rates.
Decode this car's full factory spec
Bimmer.AI takes the VIN and option codes and returns the decoded equipment list alongside the MOT history, known faults and a buyer verdict.
Run a Bimmer.AI report →Frequently asked questions
What does BMW option code S322A mean?
Keyless entry and start: the doors unlock from the handle without touching the fob. It sits in the comfort & convenience group of BMW's factory options.
Is Comfort Access (keyless entry) worth having on a used BMW?
A desirable convenience feature. Be aware keyless cars are a relay-theft target, so budget for a Faraday pouch and check the handle sensors all respond.
How do I check if a BMW has S322A?
Look for S322A (or just 322) on the car's build sheet or in the listing's options, or decode it from the VIN. You can enter the VIN and option codes into a Bimmer.AI report to see the full decoded factory spec alongside the MOT history and known faults.